
Issue 5.9.B IPDirector Version 5.9
User Manual
Part 6: Playout
Playlist
Panel
EVS Broadcast Equipment – January 2011
92
HOW TO DEFINE A JUMP-ON-TIME CONDITION
To define a jump on time condition on a playlist element, proceed as follows:
1. Select the element on which to define a jump on time condition.
2. Right-click the element.
The Playlist Element contextual menu is displayed.
3. Select Jump on time from the contextual menu.
The Define Still/Start Mode window is displayed.
4. Select On Time at/jump on time and define either
• time only
The playout of the element will be triggered at the closest corresponding
time in the future. If the playlist remains loaded, the element will be
triggered every day at the same time.
OR
• date and time
The playout of the element will be triggered at the specified time and day
and only at that time even if the playlist remains loaded.
5. Click OK.
If the time information is already defined for another element in the playlist,
a popup window displays an error message.
A green clock icon and the time defined for the jump on time condition are
displayed in the playlist grid for the selected element.
If the playlist is loaded on the channel, the element will start playing at the time
defined, using the parameters defined for the element. Refer to section ‘Jump on
Ti
me Characteristics’ on page 88 for special cases of use.
USING MACRO COMMAND TO DEFINE STILL/START MODE
Still/Start mode can also be defined by using a macro command, previously
configured to correspond to a specific effect with specific parameters. Refer to
section 1.7.9 ‘Applying a Macro Command to Trigger Playout Effects’ on page 105
fo
r information on using macro commands and to section 1.9.5 ‘Playlist Macro
Co
mmands Settings’ on page 140 for information on configuring macro commands.
Comentarios a estos manuales