Evs Xfile Version 2.13 - July 2010 User Manual Manual de usuario descargar pdf (Pagina 84)

XFile Version 2.13

–

User Manual

EVS Broadcast Equipment – July 2010

Issue 2.13.D

3.7.1 HOW TO RESTORE A FILE

To restore a backed up file on an EVS video server, proceed as follows:

1. Click the Restore button to activate the mode.

2. Select the clip from the XFile list.

3. Select the server from the XNet area: to display the list of servers present

on the XNet, click .

4. Change the display of the list to find one location where to restore the clip.

To specify this location, select the page, the bank and the camera

selection :

• To display the page/bank list, press .

• To display the list of cameras, press .

5. Select an available location in the XNet list.

6. To restore the clip to the location specified on an EVS video server, do one

of the following:

• Press (RESTOREclip) to initiate the transfer of the selected clip. The

UmID (ID-material/ID-louth) is preserved.

• Press (COPYclip) to initiate the transfer and to create a COPY of the

selected clip. In this case a new UmID is defined.

To ensure the validity of data during operations, only one UmID can be

present on the same network. Then if the operator has to use identical

clips on several machines, the COPYclip command is advised to restore

several versions of the same clip.

• Press (Short COPYclip) to initiate the transfer of a shorter copy of

the selected clip. Only the V/A material included between the IN and the

OUT points (without guardbands) will be restored. In this case, a new

IDmaterial and a new IDlouth are defined.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 191 192

Sin comentarios

Evs Xfile Version 2.13 - July 2010 User Manual Manual de usuario Pagina 84