Evs XT3 MulticamLSM Version 11.02 - July 2013 Operatio Manual de usuario descargar pdf (Pagina 32)

3.2.2. 1PGM+PRV Primary Menu Controls

Introduction

The primary menu in 1PGM+PRV mode, illustrated below, gives access to the functions

detailed in the following paragraphs:

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C Cam D

CAM A / B / C / D

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C Cam D

If PRV CTL is 'OFF', select the camera to assign to the PGM output. This camera key

will be highlighted in the menu.

If PRV CTL is 'ON', select the camera to assign to the PRV output. This camera key will

be highlighted in the menu.

Note

In 5CAM configuration (5 recorder channels and 1 player channel) or when

loading a clip where CAM E or F exists, the operational menu will display:

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C --->

By pressing the D key (--->), the operator has access to the D, E and F

cameras. The operation menu becomes:

Rst Cam Local Sync Prv 2nd CTRL

Cam D Cam E Cam F <---

Press the D key (<---) to return to CAM A, B, and C selection.

Rst Cam

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C Cam D

This function restores the position of cameras on the active channels: CAM A on PGM1,

CAM B on PRV.

Note

When a clip/playlist is loaded on a channel, switching back to Live mode will

recall the record train, which was last used on that output. This avoids too

frequent uses of the RstCam function.

22 3. Control Modes

EVS Broadcast Equipment S.A. Issue 11.02.A July 2013

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 220 221

Sin comentarios

Evs XT3 MulticamLSM Version 11.02 - July 2013 Operatio Manual de usuario Pagina 32