Evs IPDirector Version 4.4 - March 2008 Part 4 User� Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Issue 4.4.B IP Director Version 4.4 – User Manual – Part 4 – System Management & Troubleshooting
EVS Broadcast Equipment – March 2008
6
1.2 VIDEO DISPLAY
1.2.1 INTRODUCTION
The Video Display allows the user to see a display of video in a window on the
VGA output of an IP Director Workstation.
Open the Video Display panel by selecting the Video Display icon from the
Application toolbar in the IP Director main window.
Before you can actually display a channel in the Video display, you need to
perform the following tasks:
Make a physical connection from the required video source to the input of the
A/V board on the IP Director workstation.
For more information, refer to section 1.2.2Displaying Video on the Video
display Window’, on page 7.
Assign a channel to the Video Display in the Remote Installer application.
For more information, refer to section 1.2.3Assigning a Channel to a Video
Display’, on page 7.
Select the A/V board in the Video Display to open the related channel.
For more information, refer to section 1.2.4Selecting the A/V Board in the
Video Display’, on page 8.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios