Evs IPDirector Version 5.8 - July 2010 Part 7 User Manual de usuario descargar pdf (Pagina 209)

Issue 5.8.B IPDirector V.5.8

–

User Manual

–

Part 7: Editing -

IPEdit

EVS Broadcast Equipment - July 2010

196

The following screenshot shows how you need to set up the audio channel input

matrix for the G1 track to get the result illustrated in the drawing above. Proceed

the same way for the other tracks.

As you want to output the

track G1 into the track G3, you

will do the following:

• On the G1 track, click on

the bullets to mute the

channels a1 and a2.

• On the G3 track, click at the

intersection of the a1 source

channel and the a5 output

channel to route the a1

source to the a5 output.

• On the G3 track, click at the

intersection of the a2 source

channel and the a6 output

channel to route the a2

source to the a6 output.

How to Define the Audio Channel Input Matrix

1. Right-click anywhere in the timeline and select Replace Settings.

The Replace Settings window opens.

2. In the Audio Channel Input Matrix group box, map each channel that you

want to have in the replaced media (output channel) to the source channel

to be played on this output channel:

To map the source channel and the output channel, click at the intersection

of both channels in the grid that corresponds to the track where you want to

output the signal.

3. Repeat the step 2 for each output channel you want to have in your replaced

media.

4. Click Apply to save the Replace settings.

AUDIO GROUP TRACK MUTE

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 228 229

Sin comentarios

Evs IPDirector Version 5.8 - July 2010 Part 7 User Manual de usuario Pagina 209