Evs Xfile Version 2.02 - February 2009 User Manual Manual de usuario descargar pdf (Pagina 16)

XFile Version 2.02– User Manual

EVS Broadcast Equipment – February 2009

Issue 2.02.D

3.1.1 NETWORK SETUP

XFILE IDENTIFICATION ON THE NETWORK

Standalone mode

Selecting this option allows the operator to start the XFile without being

connected to the XNet. In this mode only the maintenance mode is active.

Important

The bandwidth, the video standard and the Database Size must be

identical on all machines connected to the XNet. If one system is

configured with a different bandwidth, video standard or database

size, it will block the entire network.

Net Name

The Net name defines the machine name on the network. This name is user-

defined and can exceed 8 characters, but only 8 characters will be visible

from the XNet views. Entering a Network Name is not mandatory because a

network number is automatically given to the system, but it is recommended

to name the machines in order to easily identify all systems connected to

XNet.

Net Number

Range: [1 … 29]

The Net number defines the machine number on the network. This number is

user-defined.

COMMON PARAMETERS ON THE XNET NETWORK

The values defined for the following parameters need to be the same on all

XT[2]s on the XNet network.

SDTI Speed (540Mbps / 1485Mbps)

This parameter specifies the bandwidth of the network.

Video Standard (PAL/NTSC)

This parameter specifies the video standard. NTSC format is also applicable

for HD formats.

Database Size (6000/16000clips)

This parameter specifies the maximum number of clips saved to the LSM

database.

VarID Uniticy (Global / Local)

This parameter is available from XFile version 2.00. It specifies at which

level the VarID is unique:

• Global: the VarID is unique at the XNet network level

• Local: the VarID is unique at the XT[2] level.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 188 189

Sin comentarios

Evs Xfile Version 2.02 - February 2009 User Manual Manual de usuario Pagina 16