Evs XS Version 11.01 - November 2012 Configuration Man Manual de usuario descargar pdf (Pagina 189)

Record trains OUTs

Description Specifies whether Multicam will freeze or play through when it

reaches an OUT point marked on the record train that is being

played back.

Values Two values are possible for this parameter:

• Play through:

Multicam will still countdown to the OUT point, but will

keep playing through this point.

• Freeze:

Multicam will countdown to the OUT point and will

automatically freeze:

◦ on that picture if the Post-Roll mode is disabled

◦ on that picture + the Post-Roll duration if the Post-Roll

mode is enabled.

When playing a clip, Multicam always freezes on the OUT

point (or OUT point + Post-Roll duration when Post-Roll mode

is enabled).

Default value Play through

Default copy/move

Description Specifies whether the copy operations should be executed

preferably using the SDTI or the Gigabit network.

Values Two values are possible for this parameter:

• SDTI:

The copy operations are first executed through the SDTI

network. If the SDTI network is temporarily unavailable,

the transfer is then tried through the Gigabit interface.

Transfers to GigE targets will always be performed via the

GigE interface.

• Gigabit:

The copy operations are first executed via the GigE

interface.

If the transfer is not possible (ports not connected, IP

address unknown, no more connection ports are available),

the transfer is then tried through SDTI.

The value is forced to Gigabit if the code 117 (SDTI) is not

valid on the EVS server, or if the SDTI network is not active.

Default value SDTI

179 3. Multicam Configuration

EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 211 212

Sin comentarios

Evs XS Version 11.01 - November 2012 Configuration Man Manual de usuario Pagina 189