Evs XSnano Version 11.02 - July 2012 Configuration Man Manual de usuario descargar pdf (Pagina 109)

Example

In the screenshot below, the audio mono channels defined on the A/V material on the EVS

server are allocated to the play channels in the following way:

The audio outputs are in dolby embedded format.

By default, an audio mono channel of the A/V material stored the EVS server is sent to the

corresponding embedded channel of the play channel. In this example, this is the case for

mono channels from 3 to 8.

For mono channels 1 and 2, the default mapping has been changed as follows:

• The audio mono channel 1 of the A/V material is sent to the mono channel 2 of the play

channel, and this for all play channels.

• The audio mono channel 2 of the A/V material is sent to the mono channel 1 of the play

channel, and this for all play channels.

Default Mapping for Audio Inputs and Outputs

Introduction

The tables below present the channel mapping for audio inputs and outputs in the

following configuration:

• XSnano chassis

• Maximum number of recorders or players (see section "General Information on

Supported Configurations" on page 52).

• Audio hardware configuration: 4 DB15 Analog + 16 BNC Digital

In configurations with less recorders or players, the irrelevant rows or columns should be

disregarded.

CONFIGURATION MANUAL XSnano Server 11.02

3. Multicam Configuration 101

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 173 174

Sin comentarios

Evs XSnano Version 11.02 - July 2012 Configuration Man Manual de usuario Pagina 109