Evs XT3 Version 11.01 - November 2012 Configuration Ma Manual de usuario Pagina 154

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 254
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 153
Dolby Audio Management
Concepts
Dolby Digital or Dolby 5.1 or AC-3, is an audio coding system containing up to 6
discrete channels of sound, with 5 channels for normal-range speakers (20 Hz - 20,
000 Hz) (Right front, Center, Left Front, Right Rear and Left Rear) and one channel
(20 Hz - 120 Hz) for the LFE, or subwoofer.
Dolby E is a professional coding system optimized for the distribution of surround and
multichannel audio through two-channel postproduction and broadcasting
infrastructures, or for recording surround audio on two audio tracks of conventional
digital video tapes, video servers, communication links, switchers, and routers.
Available Dolby Configurations
Case 1: The 5.1 audio signal is carried on 6 discrete PCM audio
channels
It is available on an XT3 server in all configurations.
The audio can be analog, digital or embedded depending on the configuration.
In AES audio, if the audio is correctly genlocked to the video, the sample rate
converter can be switched off.
Case 2: The 5.1 audio signal is coded in the two-channel Dolby E
standard
Dolby E over AES/EBU links
Set the configuration of the pair of channels carrying the Dolby E signal to “DY” in
the Multicam Configuration window, Channels tab. This has two effects:
It disables the sample rate converter on the input channels.
It forces all transitions to a hard cut.
If the sample rate converter is activated and the audio configuration is a mix between
PCM audio over AES and Dolby E over AES, the sample rate converter will only be
applied to the PCM over AES signal.
Dolby E Embedded in the SDI/HD SDI stream
Set the configuration of the pair of channels carrying the Dolby E signal to “EY” in
the Multicam Configuration window, Channels tab. This will force the transition to
a hard cut.
The sample rate converter parameter does not apply to embedded audio.
XT3 Server- Version 11.01- Configuration Manual
3. Multicam Configuration 144
Vista de pagina 153
1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 253 254

Comentarios a estos manuales

Sin comentarios