Evs XT3 Version 11.01 - November 2012 Configuration Ma Manual de usuario descargar pdf (Pagina 198)

• DD35: Play, Pause, Recue, Previous, Next, Skip.

• Odetics: Play, Pause, Recue, Next.

• VDCP: Play, Pause, Recue, Previous, Next, Skip.

Note

For all protocols, except AVSP, use the channel assignment (PGM1 to PGM6)

instead of the device protocol type (Sony BVW75, Odetics).

The AVSP protocol does not require any GPI IN setting in this page as they are

defined through specific serial AVSP commands. For this reason, specific AVSP

commands will not be available via the Function parameter for the GPIs IN.

TTL GPIs set as GPIs

Description Defines the 4 configurable GPIs as inputs or outputs.

Values In / Out

Default value In

GPIs IN - Channel/Device

Description Specifies the server channel or the external device connected

to the corresponding GPIinput line, and therefore to which

channel or device the GPI will be sent to.

Values The following values are possible and correspond to one of the

channels or controllers assigned in the Channel and Control

settings (Channels tab, page 1):

• PGMx: The GPI is sent to the specified play channel.

• RECx: The GPI is sent to the specified record channel.

• RMTx: The GPI is sent to the remote controller.

• <Protocol Name>: The GPI is sent to the third-party

controlling device.

GPIs IN - Port

Description Specifies the RS422 port on which the server will receive the

input signal. This setting is relevant when the device is an EVS

remote controller or third-party controller.

Values The possible values are from 1 to 6: it corresponds to the

RS422 port to which the controller specified in the

Channel/Device field is assigned in the Port settings

(Channels tab, page 1).

XT3 Server- Version 11.01- Configuration Manual

3. Multicam Configuration 188

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 253 254

Sin comentarios

Evs XT3 Version 11.01 - November 2012 Configuration Ma Manual de usuario Pagina 198