Evs IPDirector Version 4.4 - March 2008 Part 3 User� Manual de usuario descargar pdf (Pagina 171)

Issue 4.4.C IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment – March 2008

158

DEFAULT START MODE PARAMETERS FOR TRANSITIONS

To define the default start mode of elements added to a play-list use the following

dialogue settings:

Still Mode

The still mode setting determines if the play-list should stop on the selected

element and if it should stop where it stops and how it should behave.

The options are:

• Stop on first frame of current clip

• Stop on last frame of previous clip

• Stop on last frame of the previous clip, wait, then jump on first

The play-list will stop on the last frame of the previous clip, then jump on the

first frame of the selected element after a certain time which is defined in the

value box.

Start Mode

If a Still mode is defined, one of the following start modes must be defined on the

selected element if ‘automatically’ was already selected when a ‘Still mode’ is

defined, it will be changed to the ‘Manual’ start mode as the modes are mutually

exclusive.

• Manually: the selected element must be started manually (by a play or play var

command) on the Play-List panel, keyboard or ShuttlePRO controller.

• On GPI : the selected element will be started when a GPI trigger is received on

the corresponding XT server (the one the play-list is to be played on). The GPI

number and its trigger mode are defined in the general settings, GPI section.

When On GPI is selected, the corresponding GPI, which has been configured to

start a PLAY command on the on-air channel associated to the play-list tab, is

displayed in the description field.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 187 188

Sin comentarios

Evs IPDirector Version 4.4 - March 2008 Part 3 User� Manual de usuario Pagina 171