Evs IPDirector Version 5.8 - July 2010 Part 5 User Manual de usuario descargar pdf (Pagina 68)

IPDirector Version 5.8

–

User Manual

–

Part 5: Playout

–

Player Control Panel

EVS Broadcast Equipment – July 2010

Issue 5.8.B

1.5.3 HOW TO SHIFT TO THE SAME TIMECODE ON ANOTHER

RECORDER

When you want to shift to another recorder and position yourself on the same

timecode as the loaded record train, proceed as follows:

1. Click on the Pause button to freeze the record train loaded.

2. Right-chick on the Pause button to open the contextual menu.

3. Choose the recorder you want to display on the same EVS video server or

on another server.

The visual display shifts to the selected recorder at the same timecode position as

the first recorder.

1.6 CREATING MEDIA

1.6.1 HOW TO CREATE CLIPS IN THE CONTROL PANEL

To be able to create clips in the Control Panel, you need to ensure that:

• You have assigned a channel or the Software Player to the Control Panel

See section 1.3 ‘Assigning a Channel or the Software Player’ on page 51.

• You have loaded the record train or the clip from which you want to create a

new clip.

See section 1.4 ‘Loading Media’, on page 53.

Before creating clips on which you want to apply metadata, ensure that

the relevant profile is defined as the current profile.

To create a clip in the Control Panel module, proceed as follows:

1. Load the record train, the clip or the growing clip from which you want to

create a new clip

2. Create an IN point with one of the following actions:

• Place the position indicator on the jog bar where you want to create the

IN point and select the Mark IN button .

• Enter the timecode of the requested IN point in the IN field and press

ENTER.

The IN point is set:

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 101 102

Sin comentarios

Evs IPDirector Version 5.8 - July 2010 Part 5 User Manual de usuario Pagina 68