Evs IPDirector Version 5.8 - July 2010 Part 6 User Manual de usuario descargar pdf (Pagina 76)

IPDirector Version 5.8

–

User Manual

–

Part 6: Playout

–

Playlist Panel

EVS Broadcast Equipment – July 2010

Issue 5.8.B

Note

If the original record train is still available, pressing the Ret button in the

Control Panel will load the media on the same frame than the loaded clip.

This will allow retrieving media outside the original clip boundaries.

HOW TO MODIFY A LIVE OR DELAYED TRAIN

If a live or delayed train is present in the playlist, the user can modify it.

To do so, proceed as follows:

1. Right-click the element corresponding to the train in the playlist grid.

The Playlist Element contextual menu opens.

2. Select Modify LIVE or Delay from the menu.

The Insert LIVE or Delay is displayed with the information entered for the

selected element.

3. Modify the information for the element.

4. Click the OK button.

The element is modified in the playlist.

1.6.7 ADDING A LINKED CLIP TO A PLAYLIST

INTRODUCTION

A linked clip is a clip that was created at the same time as the clip already present

in the playlist but taken from a different record train. For example when recording

a show with a main transmission cut and several isolated camera angles, if clips

are created simultaneously on all angles, these would be given a linked clip status

by IPDirector.

Several actions on linked clips are possible from the Playlist Panel:

• Insert a linked clip,

• Replace by a linked clip,

HOW TO INSERT A LINKED CLIP

To insert a linked clip from the Playlist Panel, proceed as follows:

1. Select a clip in the playlist for which you want to insert linked clips.

2. Right-click the element.

The Playlist Element contextual menu is displayed.

3. Select Insert a linked clip from the contextual menu.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 177 178

Sin comentarios

Evs IPDirector Version 5.8 - July 2010 Part 6 User Manual de usuario Pagina 76