Evs MulticamLSM Version 10.01 - October 2009 Configura Manual de usuario descargar pdf (Pagina 40)

EVS Multicam Version 10.01 – Configuration Manual

EVS Broadcast Equipment SA – October 2009

Issue 10.01.I

channels on a blue background:

PROTOCOL: EditRec 1 Setting Port#1

When an EditRec engine is not set up on on the server, the first line on the

EditRec settings page will display the following message:

PROTOCOL: EditRec 2 Setting !Not Detected!

2.11.3 SETTINGS

This section describes the settings that need to or can be defined with the

EditRec protocol.

CHANGING SETTINGS

You can only edit the settings when the EditRec player channel is stopped.

When you leave a field followed by [ENTER], you need to select ENTER and press

the ENTER key on the keyboard to apply the changes.

TIME CODE SETTINGS

These are the TC settings of the playlist loaded on the EditRec channels.

Setting Name Description

Start TC

Timecode to be used for the first frame of the playlist. This

can be changed even after a playlist has been created.

Press ENTER to apply.

DF / NDF

Specifies whether timecode is drop frame or non drop frame.

Preroll TC

Duration of the playlist preroll in seconds.

Edit TC – Serial

Sony LTC

Type of timecode used in communications between the Sony

controller and the EditRec engine when the controller works

with the LTC.

This field is not editable. The value is always ‘Edit TC’,

which means the timecode of the playlist based on the Start

TC.

Edit TC – Serial

Sony VITC

Type of timecode used in communications between the Sony

controller and the EditRec engine when the controller works

with the VITC.

Possible values:

• Edit TC: playlist timecode based on the Start TC defined.

• User TC: clip timecode from the USER TC table.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 92 93

Sin comentarios

Evs MulticamLSM Version 10.01 - October 2009 Configura Manual de usuario Pagina 40