Evs MulticamLSM Version 10.01 - October 2009 Configura Manual de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 93
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
EVS Multicam Version 10.01 – Configuration Manual
EVS Broadcast Equipment SA – October 2009
Issue 10.01.I
67
3.15 HYPERMOTION CONFIGURATION
Hypermotion Configuration p.6.4
[F1]Hypermotion : Yes
[F2]Recorder : CAM A [F6] RS422 : 6
[F3]Remote Controller : Hypermotion Only
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
The Hypermotion feature is a software option (license code 20) that allows
controlling a hypermotion camera from the Remote Panel.
3.15.1 HYPERMOTION
Possible values: Yes, No (default)
When this parameter is set to ‘Yes’, the Hypermotion feature is active: Users can
access and use the Hypermotion menu on the Remote Panel via the SHIFT+D key
combination.
When this parameter is set to ‘No’, the Hypermotion feature is not active: The
Hypermotion menu can be accessed but not used on the Remote Panel.
3.15.2 RECORDER
Possible values: CAM A to CAM D. Default: last CAM
This parameter specifies the recorder channel to which the A/V material from the
hypermotion camera will be sent. The default value is the last CAM defined in the
channel configuration, for example CAM C in 3 IN 3 OUT configurations.
3.15.3 RS422
Possible values: Port #1 to Port #6. Default : Port #6
This parameter specifies on which RS422 port the commands for the hypermotion
camera must be sent.
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 92 93

Comentarios a estos manuales

Sin comentarios