Evs MulticamLSM Version 10.04 - January 2011 Configura Manual de usuario descargar pdf (Pagina 38)

Issue

10.04.A

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

2.8.2 SETTINGS DESCRIPTION

The HCTX Gigabit connection settings are described in the table below:

Port #1 / Port #2

IP Address

Specifies the IP address to connect to port 1 / port 2 of the

Gigabit Ethernet connection on the server:

• The IP addresses of both HCTX GigE ports cannot belong

to the same subnet mask. Doing so would return an error

message.

• The IP addresses

0.0.0.0 and 255.255.255.255 are not

allowed.

Subnet Mask Specifies the range of logical addresses within the address

space assigned to the Gigabit Ethernet network.

In the screenshot, the logical addresses available within the

network are from 128.1.254.1 to 128.1.254.254.

Default Gateway Specifies the IP address of the router on the Gigabit Ethernet

network that serves as an access point to external networks.

FTP Login

User name Specifies the user name for an FTP access to the server via

the Gigabit Ethernet connection.

Password Specifies the password for an FTP access to the server via

the Gigabit Ethernet connection. The password is not hidden.

Note

The modifications of parameter values in this screen are not applied when

you leave the field. You need to select the APPLY command at the bottom

right of the screen (or to press ALT+A on the keyboard) and press ENTER

to apply the modifications.

2.8.3 LOST GIGABIT NETWORK CONNECTION

If a problem is detected on the GigE connexion during operation, the following

message is displayed on the Remote panel, OSD and VGA:

‘Warning: GigE connection has been lost.

[Enter]: Continue’

In such a case, the message !Not detected! also appears at the top of page 6.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

Sin comentarios

Evs MulticamLSM Version 10.04 - January 2011 Configura Manual de usuario Pagina 38