Evs MulticamLSM Version 10.04 - January 2011 Configura Manual de usuario descargar pdf (Pagina 46)

Issue

10.04.A

EVS Multicam – Version 10.04 – Configuration Manual

EVS Broadcast Equipment SA – January 2011

2.12 MULTIVIEWER SETTINGS (PAGE 10)

The Page 10 of the Setup Configuration module makes it possible to specify the

settings for a multiviewer connected to the server.

2.12.1 INTRODUCTION

When an optional multiviewer board is installed on the server, you can monitor the

server channels on a multiviewer.

The server is connected to the display device via one of the dedicated connectors

on the server backplane:

• HD SDI connector

• SD SDI connector

• DB15 configurable connector.

When the multiviewer board is installed, Multicam automatically detects it. This

means the multiviewer feature is directly available and the user can specify the

multiviewer settings. Otherwise, the message !Not Detected! is displayed

on the first line of Page 10.

2.12.2 SETTINGS

As usual in the SHIFT-F2 screens, you move from one field to the over with the

<TAB> key and you change the value of a field by means of the arrow keys.

DISPLAY SETTINGS

Multiviewer Composition

The number of recorder or player channels to be displayed and the multiviewer

composition are defined in the field below:

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 97 98

Sin comentarios

Evs MulticamLSM Version 10.04 - January 2011 Configura Manual de usuario Pagina 46