Evs XTnano Version 10.03 - July 2010 Configuration Man Manual de usuario descargar pdf (Pagina 20)

XTnano – Version 10.03 – Configuration Manual

EVS Broadcast Equipment SA – July 2010

Issue

10.03.D

2.3.2 VITC/ANC MANAGEMENT IN HD IN AND HD/SD OUT

e pagIn HD, th e is as follows:

The following p rs can

IN LOOP

D-VITC

and user bits are always written on the monitoring SD

outputs of the record codec and are the same as on the source

aramete be defined:

The TC

video.

Lines

Lines on which the VITC must be written on the monitoring output

connectors of the record codec. By default, these are lines 14-16 in

NTSC and 19-21 in PAL

HD OUT

HANC LTC

Field to speci inserted in the

output. value specified has to be the same as for the HANC

V . The

In (default)

e timecode as in the input inserted in

the output.

LTC

Timecode from the LTC table inserted in the

output.

USER

User-defined timecode inserted in the

output.

fy if embedded timecode has to be

The

ITC field possible values are:

No new timecode inserted in the output.

Sam

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 62 63

Sin comentarios

Evs XTnano Version 10.03 - July 2010 Configuration Man Manual de usuario Pagina 20