Evs XTnano Version 10.03 - July 2010 Operation Manual Manual de usuario descargar pdf (Pagina 96)

XTnano

–

Version 10.03

–

Operating Manual

EVS Broadcast Equipment SA – July 2010

Issue

10.03.D

9. Press Enter on the Remote Panel to validate the Replace:

The material between the IN and OUT points is replaced with the newly

created clip. The playlist returns to Playlist Edit mode, positioned at the end

of the inserted clip.

You can also cancel the Replace by pressing the Menu key on the Remote

Panel.

9.15.6 LOOP MODE IN THE REPLACE FUNCTION

LOOP TYPE

When the IN point has been marked, the display switches to:

Cam A + 0field

Replace Int.Loop Ext.Loop

The Int.Loop and Ext.Loop keys are blinking.

Before entering the Replace Playback mode, the operator has to choose between

Internal Loop and External Loop.

The Internal Loop is the same loop as the existing loop process.

The External Loop allows you to select on which channel you will physically re-

record the output of your PGM. The link is physical: it is necessary to make the

video link manually with a router or video/audio cables, it is not done inside the

server.

ADDITIONAL LOOP PARAMETERS

Additional parameters are available for the external loop:

• With the Cam A function (SHIFT + C), you can select the camera the PGM will

be recorded to for the external LOOP process. Press SHIFT + C until the

desired camera is selected.

• With the +0field function (SHIFT + D), you can select by how much the video

coming back to your record channel will be delayed. If you are using a DVE, it

could introduce a delay. This system is based on the assumption that audio

and video are in sync when they hit the record channel. The delay value

cannot be negative.

Select SHIFT + D to highlight the delay value, then the display allows you to

add frames or fields of delay to the delay value. Pressing MENU or SHIFT + D

will leave this mode.

1 2 ... 91 92 93 94 95 96 97 98 99 100

Sin comentarios

Evs XTnano Version 10.03 - July 2010 Operation Manual Manual de usuario Pagina 96