Evs MulticamLSM Version 10.03 - July 2010 Configuratio Manual de usuario descargar pdf (Pagina 23)

Issue

10.03.C

EVS Multicam

–

Version 10.03

–

Configuration Manual

EVS Broadcast Equipment SA – July 2010

2.3.2 VITC/ANC MANAGEMENT IN HD IN AND HD/SD OUT

In HD, the page is as follows:

The following parameters can be defined:

IN LOOP

D-VITC The TC and user bits are always written on the monitoring SD

outputs of the record codec and are the same as on the source

video.

Lines Lines on which the VITC must be written on the monitoring output

connectors of the record codec. By default, these are lines 14-16 in

NTSC and 19-21 in PAL.

HD OUT

HANC LTC Field to specify if embedded timecode has to be inserted in the

output. The value specified has to be the same as for the HANC

VITC field. The possible values are:

No No new timecode inserted in the output.

In (default) Same timecode as in the input inserted in

the output.

LTC Timecode from the LTC table inserted in the

output.

USER User-defined timecode inserted in the

output.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 96 97

Sin comentarios

Evs MulticamLSM Version 10.03 - July 2010 Configuratio Manual de usuario Pagina 23