Evs MulticamLSM Version 10.03 - July 2010 Configuratio Manual de usuario descargar pdf (Pagina 74)

EVS Multicam

–

Version 10.03

–

Configuration Manual

EVS Broadcast Equipment SA – July 2010

Issue 10.3.C

3.13 EVS CONTROLLER SETTINGS

EVS Controller p.6.1

[F1]Effect duration for Take: 00s05fr

[F2]Fast jog : 20x

[F3]PGM Speed/Var Max : 50%

[F4]Lever engage mode : Direct

[F5]Second lever range : -100% <-> +100%

[F6]Recall Clip Toggle : Enable

[Menu]Quit [Clr+F

]Dft [F9]PgUp [F0]PgDn

3.13.1 EFFECT DURATION FOR TAKE

Possible range: 00s00fr to 20s00fr. Default: 00s05fr

This parameter defines the duration of the transition when using the TAKE key to

chain 2 sequences in PGM+PRV mode.

3.13.2 FAST JOG

Possible values: 01 to 20 times. Default: 20x

This parameter sets the increment of the jump when in Fast Jog mode.

3.13.3 PGM SPEED/VAR MAX

Possible values: 1 – 400%. Default: 50%

During playback, if PGM Spd or VarMax has been enabled in the secondary menu

of the Remote Panel, the lever range will be adapted so that:

• the only playback value for any position of the lever other than 0, is the one

specified by this parameter in the setup (PGM Spd mode ON)

• the speed range defined by the lever is limited to the value specified by this

parameter (VarMax mode ON).

3.13.4 LEVER ENGAGE MODE

Possible values: Direct (default) / Current speed

The speed variation depends on the position of the T-Bar lever.

• Direct mode: the lever will engage directly when moved, resulting in a speed

jump to the desired speed determined by the lever arm position.

• Current speed mode: the lever will only engage when it reaches the current

playback speed, whereas a move of the lever arm in the opposite direction of

the current speed will result in a direct speed change.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 96 97

Sin comentarios

Evs MulticamLSM Version 10.03 - July 2010 Configuratio Manual de usuario Pagina 74