Evs XSense Version 10.03 - July 2010 Configuration Man Manual de usuario descargar pdf (Pagina 24)

XSense

–

Version 10.03

–

Configuration Manual

EVS Broadcast Equipment SA – July 2010

Issue 10.3.A

UserBits Yes/No flag to specify if the user bits have to be inserted in the

output. The default value is ‘Yes’.

HANC VITC Field to specify if embedded timecode has to be inserted in the

output. The value specified has to be the same as for the HANC

LTC field.

The possible values are:

No No new timecode inserted in the output.

In (default) Same timecode as in the input inserted in

the output.

LTC Timecode from the LTC table inserted in

the output.

USER User-defined timecode inserted in the

output.

SD OUT

D-VITC Field to specify if embedded timecode has to be inserted in the

output. The possible values are:

No No new timecode inserted in the output.

In (default) Same timecode as in the input inserted in

the output.

LTC Timecode from the LTC table inserted in

the output.

USER User-defined timecode inserted in the

output.

Lines Lines on which the specified timecode must be written on the loop

of the input.

By default, these are lines 14-16 in NTSC and 19-21 in PAL.

UserBits Yes/No flag to specify if the user bits have to be inserted in the

output. The default value is ‘Yes’.

Clean VBI Field in which the use specifies whether the VBI needs to be

cleaned on the output. The possible values are:

No The VBI is not cleaned in the output.

Always The VBI is always cleaned in the output.

If not OK The VBI is cleaned in the output if it is not

correct (play var mode, vertical split

screen, etc.)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 89 90

Sin comentarios

Evs XSense Version 10.03 - July 2010 Configuration Man Manual de usuario Pagina 24