Evs XSense Version 10.03 - July 2010 Configuration Man Manual de usuario descargar pdf (Pagina 49)

Issue

10.03.A

XSense

–

Version 10.03

–

Configuration Manual

EVS Broadcast Equipment SA – July 2010

3. Setup from the

Remote Panel

3.1 INTRODUCTION

The values assigned to the parameters are saved as soon as they are assigned.

Important

Prior to using Multicam, the operator should enter the Setup menu and

set all necessary parameters. If clips are stored with certain parameters

and the operator wishes to change them afterwards, those clips and

playlists will not change. It is thus important to set these parameters

first.

3.2 GENERAL LAYOUT

The following diagram shows the Remote Panel along with a brief description of

each area.

1. F-keys & small

buttons

Multi-purpose keys

2. Soft keys With LCD display, allows the operator to enter the

Multicam MENU system

3. Jog dial Used to accurately cue disk recorder

4. Operational

block 1

See XSense Operating manual for more information

Operational

block 2

See XSense Operating manual for more information

LCD Display Provides current status of system

Note

The operational buttons have PRIMARY and SECONDARY functions and

are divided into upper and lower sections. By pressing the SHIFT button

you gain access to the secondary functions.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 89 90

Sin comentarios

Evs XSense Version 10.03 - July 2010 Configuration Man Manual de usuario Pagina 49