Evs XTnano Version 11.01 - November 2012 Configuration Manual de usuario descargar pdf (Pagina 117)

Collective Editing Actions

You can apply the following editing actions to all audio channels of a page using the

following shortcuts, when available on the current page:

Command description Command key

Set all audio channels to Embedded CTRL+E

Set all audio channels to Digital CTRL+D

Set all audio channels to Analog CTRL+A

Set all audio channels to Embedded Dolby E or Digital

DolbyE

CTRL+Y

Set all audio channels to None CTRL+N

Reset all the audio configuration (also on other pages) to

default values

Route all audio input channels of REC1 to the other record

channels (only audio inputs)

CTRL+0

Validating the changes ALT+A

Individual Editing Actions

To modify individual field/cell values (audio type or audio routing), use the general editing

commands that are described again below:

Command description Command key

Selecting a field value TAB

Scrolling down in the list of the possible values for the

selected field

SPACEBAR

Scrolling up in the list of the possible values for the selected

field

SHIFT + SPACEBAR

Modifying the Audio Gain and Mute Settings

Introduction

From the Advanced Audio Settings pages (3-6) of the Channels tab, you can not only

modify the default routing of audio channels, but you can also do the following:

• adjust the audio gain for each audio mono channel individually

• mute individual audio channels.

The audio gain and audio mute information is hidden by default. The CTRL+G command

allows you to toggle the display in the tables to show the audio gain and mute information.

107 3. Multicam Configuration

EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.A

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 181 182

Sin comentarios

Evs XTnano Version 11.01 - November 2012 Configuration Manual de usuario Pagina 117