Evs XTnano Version 11.01 - November 2012 Configuration Manual de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
The Dolby E transitions will be correct as long as:
the configuration is correct
the AES stream containing Dolby E is correctly synchronized with the video
Dolby E transitions will not be correct (2 frames of mute at the transitions) if the audio type
is set to E instead of EY or D instead of DY.
Audio effects (scrub, slow motion) are not possible in Dolby E. If they are used anyway,
the audio will be muted.
3.4.4. Timecode and Data Insertion
Timecode Settings
Introduction
The Timecode settings allow specifying which type of timecode the users want to use as
the reference to work on a given recorder of an EVS server.
The selection of a timecode type, using the timecode settings, rely on the management of
two timecode jump tables.
These fields are available in the following interfaces:
in the Multicam Configuration window, Channels tab, in the advanced display mode:
on page 6, 7 or 8 on the server-based application.
on page 1 on the web-based interface.
partly in the Technical menu of the Remote Control Panel (T2.X).
The following screenshot highlights the Timecode settings, defined on page 8 of the
Channels tab in the server-based application:
XTnano Server- Version 11.01- Configuration Manual
3. Multicam Configuration 110
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 181 182

Comentarios a estos manuales

Sin comentarios