Evs IPDirector Version 5.6 - May 2009 Part 6 User' Manual de usuario descargar pdf (Pagina 100)

IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel

EVS Broadcast Equipment – May 2009

Issue 5.6.D

END-CUE MECHANISM

When the END CUE mode is activated, the GPI is sent every time the playlist

stops, which means:

• at the end of the playlist, except if the loop mode is activated and the start

mode option of the first element is set to Automatically.

• every time a still mode option (Stop on Last, Stop on Last, Wait, Jump on

Fisrt or Stop on First) is set on an element.

Refer to section ‘Define Still/Start Mode Window’ on page 63 for more information

n these options.

End-Cue Characteristics

• The END CUE duration is independent of the speed of the playlist. This means

that the GPI will be sent a period of time, corresponding to the END CUE

duration, before the playlist stops whatever the speed of the element may be.

• The GPI is not necessarily sent during the playout of the element where the

playlist will stops as the END CUE duration can be greater than the element

duration.

• The END CUE GPI is not sent if the END CUE duration is greater than the

remaining time until next break.

• The END CUE duration as well as the END CUE GPI can be modified at any

time, should the END CUE mode be activated or not.

• The END CUE mode is activated for a channel and not for a specific playlist.

• The END CUE GPI and duration can be different for each channel.

• The END CUE GPI is only sent in transmission mode, when the playlist is being

played out, not in Edit mode.

• The END CUE mode is automatically turned off when the Multicam starts as

there is no reason to keep a mode from a previous use of an XT[2] server.

1.6.11 WORKING WITH POST-ROLL

PURPOSE

The Post-Roll is the ability to play an element a few seconds after its defined OUT

point, as far as there is enough A/V material in the guardband.

The purpose of using Post-Roll is:

• to provide a countdown until the OUT point of the playlist element through the

Remaining Time until Next Transition value to allow the operator to know

when to switch to another device, and

• to continue the playout after the OUT point in order not to freeze before the

operator performs the transition from the playlist.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 156 157

Sin comentarios

Evs IPDirector Version 5.6 - May 2009 Part 6 User' Manual de usuario Pagina 100