
Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
68
and to section 1.8.4 ‘Playlist Macro Commands Settings’ on page 108 for
information on configuring macro commands.
Tag Types
There are six types of tag that can be selected:
Tag Type Description
GPI A signal will be sent from the XT server under the
control of the IPDirector, as defined in the Tools >
Settings > Output GPIs category.
Hide On The video output turns instantly to a black screen at
the timecode value given to the tag.
Hide Off The video output turns instantly from a black screen
to the video of the element at the timecode value
given to the tag.
Mute On The audio of the element turns to a muted state, at
the timecode value given to the tag, with a mix audio
transition effect.
Mute Off It returns the audio of the element from a muted
state, at the timecode value given to the tag, with a
mix audio transition effect.
Swap Audio Tracks Audio tracks are swaped according to the selected
configuration.
Limitation for the Use of Tags
A Mute tag and a Swap Audio tracks tag cannot be defined on the same T/C. If
Mute and Swap are conflicting, the following error message is displayed:
Comentarios a estos manuales