Evs IPDirector Version 5.6 - May 2009 Part 6 User' Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 157
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 6: Playout – Playlist Panel
EVS Broadcast Equipment – May 2009
6
To deactivate the on-air function, right-click the Channel Name field and uncheck
On Air from the menu.
This only provides a visual warning that the current playlist is On Air.
This can be selected manually on the Playlist Panel or can be set using a GPI. For
more information on setting this parameter using a GPI, see the section ‘Settings
– Input GPIs’ in part 1 of the user manual.
Channel Contextual Menu
Right-clicking the Channel Name field displays the channel contextual menu.
This menu makes it possible to perform the following actions:
Option Description
2ND Controler Allows toggling the control between the Playlist Panel
and the secondary control device. Refer to section
below for more information.
Mode Gives access to a sub-menu allowing operations in 1
PGM mode or in PGM/PRV mode.
On Air Activates the on air display.
Set Channel to IDLE Unloads the playlist from the player channel.
None Allows the user to work on a playlist without
associating a player channel to it.
Workstation Channel Corresponds to the linked channel assigned to the
local IPDirector workstation.
Assigned in the Channel Management area of the
Remote Installer.
“List of the available
channels”
Gives the list of all the player channels available on
the XNet network, and visible to the current user
Secondary Control mode
Exclusive control of any channel by a third party protocol (switcher, editor
controller or 3
rd
party device) can be achieved using the 2
nd
Controller feature of a
Playlist Panel. This feature allows switching the control between IPDirector and
the other device, when the port and protocol settings have been assigned to work
in Exclusive mode.
The 2
nd
Controller option is only available if the channel has been configured with
the IPDP protocol as the main controller in exclusive mode.
When the configuration has been set to parallel mode the control of the channel is
from either IPDirector or the 3
rd
Party device simultaneously and the second
control feature is inactive.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 156 157

Comentarios a estos manuales

Sin comentarios