Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario Pagina 188

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 201
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 187
Issue
10.04.A
EVS Broadcast Equipment SA January 2011
178
18.2 OVERVIEW ON COMMANDS
18.2.1 MAIN MENU
The Hypermotion menu includes the following main and a secondary menu.
The main menu displays the blocks that have been selected in the #Blocks
parameter of the secondary menu. Only the activated blocks will be displayed. The
block highlighted is the one the operator is currently working on.
18.2.2 SECONDARY MENU
Pressing the MENU key opens the secondary menu:
# Blocks
Pre-Roll
PGMSpeed
2ndLever
2
00s10fr
50%
+- 1000
The secondary menu gives access to the hypermotion settings described in the
table below. To modify a setting, press the corresponding softkey and jog to select
the requested value.
Setting Description Values
#Blocks
Number of memory blocks of the hypermotion
camera to be used.
The number of blocks displayed in the main
menu depends on the number of blocks
specified in this parameter.
1 to 4
(default: 1)
Pre-Roll
Pre-
roll for the cue points defined on the
material recorded on the hypermotion camera.
The last cue command will go to the desired
TC - pre-
roll if the material is available. If
not, the pre-roll is not applied.
From 0s01fr to
05s00fr
(default: 00s00fr)
PGMSpeed
PGM speed that is to be applied for playing
back material recorded on the hypermotion
camera.
50, 100 (default),
200, 300, 400,
1000
Hyper Motion Camera Mode
# Blocks
Pre-Roll
PGMSpeed
2ndLever
2
00s10fr
50%
+- 1000
LSM Mode
Block 1
Block 2
Vista de pagina 187
1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 200 201

Comentarios a estos manuales

Sin comentarios