Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario descargar pdf (Pagina 80)

Issue

10.04.A

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

9.4.4 VDR PANEL – RECORDER WINDOW

The VDR Panel Recorder can be used to start/stop the record, and to create clips

from the local record trains. For example, it allows the creation of clips on a

server that has no Play channel.

HOW TO START/STOP THE RECORD

Press ALT+R to start or stop the record on the record channel assigned to the

window. No confirmation is required.

Important

In LSM mode, all recorders will be stopped at once to keep the

synchronization between all record channels.

CREATING CLIPS WITH THE VDR PANEL RECORDER

1. Press ALT+I / ALT+O to mark a Short IN / Short OUT point on the last

recorded picture. The timecode appears in the adjacent field, and the cursor is

automatically placed on that field to allow the operator to edit the timecode of

the Short IN / Short OUT point if desired. Press ENTER to confirm or ESC to

cancel.

2. Repeat this operation for the complementary Short IN / OUT point. This is not

mandatory. If only a Short IN or a Short OUT point is marked, the Default Clip

Duration defined in the Setup (p.2.2 F2) will be used to define the missing

point.

3. Select from which record train(s) the clip(s) must be created: press ALT + the

letter (A/B/C/D/E/F) of a record train to select / de-select it. Letters

highlighted in RED means that a clip will be created from the corresponding

record train ; letters highlighted in green means that the corresponding record

train is available but will not be used to create a clip.

4. To define the name of the clip before saving it, press ALT+N, type the desired

name and validate with ENTER.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 200 201

Sin comentarios

Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario Pagina 80