Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario descargar pdf (Pagina 189)

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

179

Setting Description Values

Lever

Secondary lever range to be applied for

playing back

material recorded on the

hypermotion camera.

0-1000, +- 1000

(default)

18.2.3 KEY COMMANDS

INTRODUCTION

This section presents the various commands you can use on the Remote Panel to

control the hypermotion camera. The corresponding command on the hypermotion

camera is mentioned when available.

The standard behavior, applicable to all cameras (Photron, Vision Research and

ARRI) is first explained. When a given camera has a specific behavior, this is

explicitly mentioned.

PLAY

‘Play’ command on hypermotion cameras

Pressing the PLAY key on the LSM Remote panel initiates a replay from the first

frame available on the current memory block.

SHIFT+PLAY / -

No corresponding command on hypermotion cameras

Pressing the SHIFT+PLAY keys on the LSM Remote panel initiates a replay on the

current memory block at the speed defined in the PGMSpeed parameter.

Pressing again SHIFT+PLAY returns to the normal playing speed.

Mark

MARK

‘Mark Cue Point’ command on hypermotion cameras

With a single-block memory, pressing MARK marks a cue point of the current

block.

This is not available on all cameras with multiple-block memory.

LAST CUE

Search command on hypermotion cameras.

With a single-block memory, pressing LAST CUE goes to the previous cue point if

cue points have been defined.

With a multiple-block memory, pressing LAST CUE goes to the previous cue point

of the current block if cue points have been defined on this block.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 200 201

Sin comentarios

Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario Pagina 189