Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario descargar pdf (Pagina 24)

Issue

10.04.A

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

4. Remote Panel

Operations

4.1 OPERATIONS

4.1.1 RECORD

This key lights red when the system is recording. Pressing this key brings the

system in E/E (“live”) mode, and starts the record if necessary (depending on the

settings of the Setup menu). The E/E mode is actually playing pictures already

recorded by the system, and has a delay of 3 frames compared to the live source,

on all audio and video tracks.

4.1.2 MARK

This function marks up to 256 cues that can be marked while recording or playing.

The cues are marked on the LIVE or PLAYBACK program depending on the value

set in the Setup menu. When the operator has marked 256 cues, the next one will

overwrite the oldest one.

4.1.3 LAST CUE

This function re-cues the EVS server to previous cue point relative to the current

timecode position. Each time the Last Cue button is pressed, the EVS server re-

cues to the previous cue, etc. When recalling a cue point, the cue number appears

in the upper left corner of the OSD if this option is enabled in the Setup menu

(page 1.1, F4)

4.1.4 PLAY

This function initiates a forward motion. It can also be used to start playback of

playlists and clips (refer to PLST command).

When Pgm Spd/Var Max is OFF, the default playback speed when pressing the

PLAY key is 100% for standard pictures, 33% for Super Motion pictures with a

Triple Speed camera (SD), and 50% for Super Motion pictures with a Double

Speed camera (HD),.

When Pgm Spd/Var Max is ON, the value defined in the Setup for this parameter

is used.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 200 201

Sin comentarios

Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario Pagina 24