Evs MulticamLSM Version 10.04 - January 2011 Operating Manual de usuario descargar pdf (Pagina 195)

EVS Multicam Version 10.04 – Operating Manual

EVS Broadcast Equipment SA – January 2011

Issue

10.04.A

185

EXAMPLE

The following steps provide an example for a typical use of the LSM Remote

commands with a Vision Research camera:

1. Initially, the blocks are recorded or empty

Block 1 Block 2 Block 3 Block 4

2.

Press RECORD on the Remote to delete any recorded material on the blocks

and starts the recording in loop mode on block 1.

Block 1 Block 2 Block 3 Block 4

3.

Press TAKE to stop recording on the current block, and start recording on

the next available one (block 2). Play starts on Block 1.

Block 1 Block 2 Block 3 Block 4

4.

Press CLEAR to stop the play on Block 1 and delete the material recorded

on that block. As the block 2 is being recorded, no record is started on block

1.

Block 1 Block 2 Block 3 Block 4

5.

Press TAKE to stop the record on Block 2 and start it on the first available

block (Block 1). Play starts on block 2.

Block 1 Block 2 Block 3 Block 4

6.

Press TAKE

again to stop the record on block 1 and start it on the first

available block (Block 3). The play on block 2 is not affected.

Block 1 Block 2 Block 3 Block 4

7.

Press CAM A to cue block 2 at the beginning, and load the last recorded

frame on block 1 in play mode. The record carries on block 3.

Block 1 Block 2 Block 3 Block 4

8.

Press CAM C to stop the record on block 3 and start the record on the first

available block (block 4). The last recorded frame on block 3 is loaded in

play mode.

Block 1 Block 2 Block 3 Block 4

9. Press TAKE to stop the record on block 4.

Block 1 Block 2 Block 3 Block 4

10.

Press CLEAR to stop the play on block 3, delete the material on block 3 and

start recording on block 3.

Block 1 Block 2 Block 3 Block 4

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 201

Comentarios a estos manuales

Sin comentarios