
EVS Multicam - User Manual
EVS Broadcast Equipment SA – March 2008
Version 9.00
149
13.2.7.3 VIDEO DELAY
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press SHIFT + A Base (B).
4. Press to highlight V DELAY (SHIFT + B)
5. At the on screen prompt, enter a value on the F_ keys including leading
zeros (0+2+1+2= 2:12), OR move the T-BAR and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.
13.2.7.4 EDIT POINT (A BASE)
Video from the previous clip is extended and video from the clip being
edited is shortened.
Note
When editing using the Video IN/OUT as the reference point (V
BASE) the video will be the top line on the OSD display. When
editing using the audio IN/OUT as the reference point (A BASE)
the audio will be the top line on the OSD display.
13.2.7.5 VIDEO SPLIT
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight A Base (SHIFT+B)
4. Press to highlight V SPLIT (D)
5. Jog to the point where you want to set your transition and mark an OUT
point if you do a video delay or mark an IN point if you do a video
advance.
The value entered will be present on the PRV SCREEN when the clip is next
to play in a playlist.
Comentarios a estos manuales