Evs MulticamLSM Version 9.00 - March 2008 User's Manual de usuario descargar pdf (Pagina 200)

EVS Multicam - User Manual

EVS Broadcast Equipment SA – March 2008

Version 9.00

191

GLOSSARY

HANC LTC Horizontal Ancillary time code LTC as defined in

the XMPTE 259M and RP188 standards.

HANC VITC Horizontal Ancillary time code VITC as defined in

the XMPTE 259M and RP188 standards.

LTC Linear or Longitudinal Time Code. This is the

time code defined on or plugged into the XT[2]

server.

LTC table Time code jump table in which the jumps in LTC

time codes are stored.

OSD On-Screen Display. Information displayed on the

output monitor.

Protect IN point Position, i.e. time code, which represents the

first image of the protected video material for a

clip, i.e. the first image before the IN guardband.

Protect OUT point Position, i.e. time code, which represents the

last image of the protected video material for a

clip, i.e. the last image after the OUT guardband.

Short IN point Position, i.e. time code, which represents the

first image of a clip. This is also called IN point

in this user manual.

Short OUT point Position, i.e. time code, which represents the

last image of a clip. This is also called OUT point

in this user manual.

VITC Vertical Internal Time Code. This is the time

code, associated with the video signal. It is

inserted in the vertical blanking interval of the

video signal.

VITC table Time code jump table in which the user defined

time code type is stored. This will usually be the

VITC in SD and HANC VITC in HD but could be

another time code type.

1 2 ... 195 196 197 198 199 200 201

Sin comentarios

Evs MulticamLSM Version 9.00 - March 2008 User's Manual de usuario Pagina 200