Evs XT3 Version 11.00 Configuration Manual Manual de usuario Pagina 216

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 227
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 215
Warning
The cam mapping feature and setting are only available if the license code 126,
which allows the mapping of additional cameras, is valid.
The following screenshot presents page 5 of the Operation tab in the server-based
application, where the Cam Mapping settings are available, and highlights the Cam
Mapping settings area:
Mapping of Network Cameras
This feature allows the mapping of network cameras to unused camera positions on the
remote (up to the last D camera).
The mapping allows a quick selection of network trains on the network. Nevertheless,
please note that these cameras are NOT recorded on the local server, they remain
recorded on their respective destination servers.
For example, in a 2IN 2OUT configuration, the cameras C and D are not used and thus is
possible to map up to 2 network cameras:
Cam A and Cam B are local cameras.
Cam C and Cam D can be mapped to network cameras using respectively the Cam C
and Cam D parameters.
Cam Mapping
Description Enables or disables the cam mapping feature.
Values Yes / No
Default Values No
XT3 Server-Version 11.00-Configuration Manual
3. Multicam Configuration 210
Vista de pagina 215
1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 226 227

Comentarios a estos manuales

Sin comentarios