Evs XT3 Version 11.02 - July 2013 Configuration Manual Manual de usuario descargar pdf (Pagina 145)

Collective Editing Actions

You can apply the following editing actions to all audio channels of a page using the

following shortcuts, when available on the current page:

Command description Command key

Set all audio channels to Embedded CTRL+E

Set all audio channels to Digital CTRL+D

Set all audio channels to Analog CTRL+A

Set all audio channels to Embedded Dolby E or Digital

DolbyE

CTRL+Y

Set all audio channels to None CTRL+N

Reset all the audio configuration (also on other pages) to

default values

Route all audio input channels of REC1 to the other record

channels (only audio inputs)

CTRL+0

Validating the changes ALT+A

Individual Editing Actions

To modify individual field/cell values (audio type or audio routing), use the general editing

commands that are described again below:

Command description Command key

Selecting a field value TAB

Scrolling down in the list of the possible values for the

selected field

SPACEBAR

Scrolling up in the list of the possible values for the selected

field

SHIFT + SPACEBAR

Modifying the Audio Gain and Mute Settings

Introduction

From the Advanced Audio Settings pages (3-6) of the Channels tab, you can not only

modify the default routing of audio channels, but also do the following:

• Adjusting the audio gain for each audio mono channel individually

• Muting individual audio channels

The audio gain and audio mute information is hidden by default. The CTRL+G command

allows you to toggle the display in the tables to show the audio gain and mute information.

CONFIGURATION MANUAL XT3 Server 11.02

3. Multicam Configuration 137

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 243 244

Sin comentarios

Evs XT3 Version 11.02 - July 2013 Configuration Manual Manual de usuario Pagina 145