Evs XT3 Version 11.02 - July 2013 Configuration Manual Manual de usuario descargar pdf (Pagina 231)

3.9.12. Cam Mapping Settings

User Interface

The Cam Mapping settings allow specifying the settings related to the mapping of

network cameras to unused camera positions on the remote up to the camera D.

These fields are available in the following interfaces:

• in the Multicam Configuration window, Operation tab, in the basic display mode:

◦ on page 5 on the server-based application

◦ on page 1 on the web-based interface

• in the Operational setup menu of the Remote Control Panel (page 10.1)

Warning

The cam mapping feature and setting are only available if the license code 126,

which allows the mapping of additional cameras, is valid.

The following screenshot presents page 5 of the Operation tab in the server-based

application, where the Cam Mapping settings are available, and highlights the Cam

Mapping settings area:

Mapping of Network Cameras

This feature allows the mapping of network cameras to unused camera positions on the

remote (up to the last D camera).

The mapping allows a quick selection of network trains on the network. Nevertheless,

please note that these cameras are NOT recorded on the local server, they remain

recorded on their respective destination servers.

For example, in a 2IN 2OUT configuration, the cameras C and D are not used and thus is

possible to map up to 2 network cameras:

• Cam A and Cam B are local cameras.

CONFIGURATION MANUAL XT3 Server 11.02

3. Multicam Configuration 223

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 243 244

Sin comentarios

Evs XT3 Version 11.02 - July 2013 Configuration Manual Manual de usuario Pagina 231