EVS XT-3 Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
XT3 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual
Issue
10.05.D
EVS Broadcast Equipment SA July 2011
31
‘PGM1+PGM2’ can represent the 2PGMs mode as well as the PGM/PRV mode.
Important
The cells with ‘NA’ correspond to impossible configurations taking into
account the existing constraints. In this case, the Hypermotion option is
not available in the operational menu even if the Hypermotion setting is
set to ‘Yes’.
1.4.8 EMBEDDED AUDIO SIGNALS IN REC/PLAY
Embedded audio is present on the monitoring of the codecs in rec.
In the Hardware Technical Reference manual, you can find schemas that show
which video signal is present on each of the BNC of a V3X input/output.
The tables in this section describe which video and embedded audio signals are
present on each BNC connector:
In SD and HD configurations :
o J1 is not connected.
o J5 is not used.
In 3D or 1080p Dual Link configurations:
o The embedded audio is only available on the left eye (3D) or link 1
(1080p).
o No audio is available on J5 and J3.
SD Codec in Rec
BNCs
Video
Embedded Audio (if
present at input)
Delay
Phase
J8
SD Input
Yes
n/a
n/a
J6
SD-SDI loop of input J8 (IN1)
Audio of J8
n/a
n/a
J7
SD-SDI loop of input (J8)
Audio of J8
n/a
n/a
J3
SD-SDI loop of input (J8)
Audio of J8
n/a
n/a
J1
SD-SDI or CVBS signal of J8 with OSD (not
connected)
Audio of J8 only in SDI
(not connected)
n/a
n/a
J4
SD signal of J8 with OSD
Audio of J8
n/a
n/a
SD Codec in Play
BNCs
Video
Embedded Audio
(depending on the avcfg
configuration)
J8
n/a
n/a
J6
SD clean output
Yes
J7
SD clean output
Yes
J3
n/a
n/a
J1
SD-SDI or CVBS output with OSD
(not connected)
Only in SDI
J4
SD output with OSD
Yes
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 93 94

Comentarios a estos manuales

Sin comentarios