EVS XT-3 Manual de usuario descargar pdf (Pagina 52)

Issue

10.05.D

XT33 Series DISK RECORDER – Version 10.05 - Software Technical Reference

EVS Broadcast Equipment SA – July 2011

Aspect Ratio

In High Definition, this parameter allows the user to select the format of the image

for the downconverted outputs of the XT3 (not used in SD configurations).

4:3 L Box letterbox (default

), the entire width of the 16:9 original

picture is shown, but there are black panels horizontally

above and below the picture.

4:3 Crop the sides of the 16:9 picture are cut off but the 4:3 frame is

filled.

16:9 anamorphic, widescreen mode.

The 16:9 picture area is squeezed horizontally to fit inside

the 4:3 space.

In Standard Definition, the parameter defines the aspect ratio of the incoming

video feeds to adjust the aspect ratio of the graphics when drawing circles in

Target Tracking and Painting modes, and for third-party usage, and in Xedio for

instance.

Char OUT

This parameter is only displayed on and applicable to EVS servers with V3X

boards.

Possible values: For J4 connector [HD or SD] (Default SD). For J1 connector

[CVBS or SDI] (Default CVBS)

This parameter specifies the type of output monitoring on the J4 and J1

connectors.

You can choose to monitor:

• in HD or SD on J4 connector

• in CVBS or SDI on J1 connector.

OUT B J3

This parameter is only displayed on and applicable to EVS servers with V3X

boards.

Possible values: [HD or SD] (Default HD)

This parameter, which is only displayed in Dual Link configurations, makes it

possible to select whether you want the J3 output in HD or SD.

SD Edge Enhancement

Range: [0 – 200%] (Default 66%)

This parameter specifies the value of the edge enhancer for the SD

downconverted outputs of the XT3 servers set in HD.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 93 94

Sin comentarios

EVS XT-3 Manual de usuario Pagina 52