EVS XT-3 Manual de usuario descargar pdf (Pagina 59)

XT3 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual

Issue

10.05.D

EVS Broadcast Equipment SA – July 2011

HIGH DEFINITION

If the REF TYPE is set to ’SD BlackBurst’ and if the system is configured for HD,

the phase definition window appears as follows:

The main phase value for SD can be adjusted between - 12000 ns and +15000 ns

by 37 ns steps and the secondary phase value (relative phase of the HD SDI

outputs compared to the phase of the SD SDI outputs) can be adjusted between -

1000 ns and +1000 ns by 13.5 ns steps

If the REF TYPE is set to ‘HD Tri-Level Sync’, the phase definition window is as

follows:

The main phase value for HD can be adjusted between - 30000 ns and +32000 ns

by 13.5 ns steps and the secondary phase value (relative phase of the SD SDI

outputs compared to the phase of the HD SDI outputs) can be adjusted between -

400 ns and +400 ns by 37ns steps

COMMANDS

• Press the LEFT ARROW and RIGHT ARROW keys to adjust the main phase

value by half pixel (i.e. SD: 37 ns or HD:13.5 ns) steps or type in the value in

the Phase Value field.

• Press the CTRL+LEFT ARROW and CTRL+RIGHT ARROW keys to adjust the

phase value by 1-line (i.e. 1440 in SD; 2880 half pixel in HD 720p; and 3840

half pixel in HD 1080i) steps.

• Pres the <TAB> key to toggle between Main Phase and Secondary Phase

fields.

• Press the UP ARROW and DOWN ARROW keys to adjust the secondary phase

value by half pixel (i.e. SD: 37 ns or HD:13.5 ns) steps or type in the value in

the Phase Value field.

• Press ENTER to save the new values and return to the Maintenance menu or

press ESC to go back to the Maintenance menu without saving the changes.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 93 94

Sin comentarios

EVS XT-3 Manual de usuario Pagina 59