EVS XT-3 Manual de usuario descargar pdf (Pagina 50)

Issue

10.05.D

XT33 Series DISK RECORDER – Version 10.05 - Software Technical Reference

EVS Broadcast Equipment SA – July 2011

SOFTWARE RELEASES AREA

LSM

This parameter displays the version number of Multicam software installed.

HCT

This parameter displays the version number and release date of HCT microcode

installed.

NETWORK AREA

SDTI

Possible values: [off / 1485Mbps Non-Relay]

This parameter makes it possible to enable the SDTI option and select the

bandwidth of the network.

On XT3 servers, there is one pair of SDTI connectors: XNet2 Non-Relay

connectors are used at 1485 Mbps.

The SDTI circuit is closed only when the Multicam software is started.

Important

The SDTI bandwidth must be identical on all XT3 servers connected to

the XNet.

If one system is configured with a different bandwidth, it will block the

entire network.

The Disk Block Size parameter must be the same on all XT3 servers.

Net Name

The Net name defines the machine name on the network. This name is user-

defined but cannot exceed 8 characters. Entering a Network Name is not

mandatory because a network number is also assigned to the system, but it is

recommended to easily identify all servers connected to the XNet.

Net Number

Range: [1 … 29]

The Net Number parameter defines the machine number on the network. This

number is user-defined and must be unique for each system on the network. When

entering a new number if this number is already assigned to another machine, an

error message will warn the user.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 93 94

Sin comentarios

EVS XT-3 Manual de usuario Pagina 50