EVS XT2+ Manual de usuario descargar pdf (Pagina 13)

XT2 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual

Issue

10.05.A

EVS Broadcast Equipment SA – July 2011

1.3 AUDIO & VIDEO CHANNEL PARAMETERS

(AVCFG)

1.3.1 INTRODUCTION

Important

Most parameters are factory preset, and should not be modified without

advice of qualified EVS staff. Improper values for some parameters will

prevent the proper operation of the system.

Please refer to the parameters’ charts for correct values (See section

1.4.9 ‘Default Parameters’, on page 44).

Each application has its own set of parameters. When the user selects an

application in the EVS main menu and press F8 (Parameters), the A/V Channels

Configuration window (also called AVCFG) appears:

This window is used to define video & audio channels, type and configuration of

recorders, audio format and audio-video synchronization parameter. All the

parameters are described in this section.

1.3.2 HOW TO MODIFY A/V CHANNEL PARAMETERS

1. From the EVS main menu, press F9 to open the Maintenance menu.

2. Select the ‘Channel Parameters’ item and press ENTER.

3. Select the Application to configure and press ENTER.

The A/V Channel Config window appears.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 84 85

Sin comentarios

EVS XT2+ Manual de usuario Pagina 13