EVS XT2+ Manual de usuario descargar pdf (Pagina 59)

XT2 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual

Issue

10.05.A

EVS Broadcast Equipment SA – July 2011

Important:

By default, the online rebuild process takes up 10% of the disk

bandwidth. If you want to change this, contact EVS support.

RETRIEVING LOGS

If you suspect that the drive disconnection in operation was not due to a severe

disk failure, but perhaps to the server being too prompt to disconnect a drive, you

must run a hardware check immediately after ending the session during which the

disk was disconnected.

Don’t rebuild the RAID, but press simultaneously the ALT+L keys to generate the

log file C:\LSMCE\DATA\LOG\SCSI.LOG, and send this file to EVS for detailed

analysis. Note that this procedure is only valid if the drive is disconnected during

operation, not for a drive being disconnected when booting the system.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 84 85

Sin comentarios

EVS XT2+ Manual de usuario Pagina 59