
XT2 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual
10.05.A
EVS Broadcast Equipment SA – July 2011
‘PGM1+PGM2’ can represent the 2PGMs mode as well as the PGM/PRV mode.
Important
The cells with ‘NA’ correspond to impossible configurations taking into
account the existing constraints. In this case, the Hypermotion option is
not available in the operational menu even if the Hypermotion setting is
set to ‘Yes’.
1.3.8 EMBEDDED AUDIO SIGNALS ON COHX AND V3X IN
REC/PLAY
Embedded audio is present on the monitoring of the codecs in rec.
In the Hardware Technical Reference manual, you can find schemas that show
which video signal is present on each of the BNC of a COHX and V3X input/output.
The tables in this section describe which video and embedded audio signals are
present on each BNC connector:
• SD and HD configurations on EVS servers with COHX or V3X boards are
similar except that:
o J1 is not connected on V3X boards
o J5 is not used in SD/HD configurations
• In 3D or 1080p Dual Link configurations with COHX or V3X boards, the
embedded audio is only available on the left eye (3D) or link 1 (1080p). No
audio is available on J5 and J3.
SD Codec in Rec (COHX & V3X)
present at input)
SD-SDI loop of input J8 (IN1)
SD-SDI loop of input (J8)
SD-SDI loop of input (J8)
SD-SDI or CVBS signal of J8 with OSD (not
connected on V3X)
(not connected on V3X)
SD Codec in Play (COHX & V3X)
(depending on the avcfg
configuration)
SD-SDI or CVBS output with OSD
(not connected on V3X)
Comentarios a estos manuales