EVS XT2+ Manual de usuario descargar pdf (Pagina 51)

XT2 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual

Issue

10.05.A

EVS Broadcast Equipment SA – July 2011

The main phase value for HD can be adjusted between - 30000 ns and +32000 ns

by 13.5 ns steps and the secondary phase value (relative phase of the SD SDI

outputs compared to the phase of the HD SDI outputs) can be adjusted between -

400 ns and +400 ns by 37ns steps

COMMANDS

• Press the LEFT ARROW and RIGHT ARROW keys to adjust the main phase

value by half pixel (i.e. SD: 37 ns or HD:13.5 ns) steps or type in the value in

the Phase Value field.

• Press the CTRL+LEFT ARROW and CTRL+RIGHT ARROW keys to adjust the

phase value by 1-line (i.e. 1440 in SD; 2880 half pixel in HD 720p; and 3840

half pixel in HD 1080i) steps.

• Pres the <TAB> key to toggle between Main Phase and Secondary Phase

fields.

• Press the UP ARROW and DOWN ARROW keys to adjust the secondary phase

value by half pixel (i.e. SD: 37 ns or HD:13.5 ns) steps or type in the value in

the Phase Value field.

• Press ENTER to save the new values and return to the Maintenance menu or

press ESC to go back to the Maintenance menu without saving the changes.

Important note 1:

The SD phase is always adjusted according to the SDI outputs. Internal

CVBS outputs have a delay of 48 x 37 nsec compared to the

corresponding SDI outputs.

Important note 2:

The internal CVBS outputs can not be used to feed directly a vision mixer

or any equipment performing video effects, since the phase of the chroma

subcarrier is not adjustable internally.

1.4.8 DEFAULT APPLICATION

This option is used to define the default application that is automatically started

by the system. Every time the EVS software is entered, the default application is

started a few seconds later. You can avoid the automatic start by pressing the

<SPACE BAR> or the UP ARROW and DOWN ARROW keys immediately when

entering the EVS software. If no default application has been defined, the system

will remain in the EVS software.

The default application is shown against a black background in the Application

window.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 84 85

Sin comentarios

EVS XT2+ Manual de usuario Pagina 51