EVS XT2+ Manual de usuario descargar pdf (Pagina 45)

XT2 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual

Issue

10.05.A

EVS Broadcast Equipment SA – July 2011

Genlock

Possible values: [OK or BAD]

This information is automatically displayed. This parameter checks if the Genlock

input is valid.

TC In

This parameter displays the status of the LTC input of the server, and the video

format corresponding to the incoming timecode.

Ex: “TC in 12:24:45:09 PAL” or “TC in 12:24:45:09 NTSC”. If no valid timecode is

detected, the display will show “TC in --:--:--:-- Bad”.

Phase

This parameter shows the value currently set for the main video phase of the

digital video outputs. Refer to the ‘Phase Definition’ section for details.

1.4.3 RAID CONFIGURATION

RAID CONSTRUCTION

At the first start, the software builds the raids using the following settings:

• If internal and external storage are detected, both are used

• (5+1) raid configuration with a maximum of 5 spares is used. First, all the

raids are built. The remaining disks are used as spare disks. The construction

of raids starts with internal arrays and carries on with external arrays. A raid

can be created across several hardware arrays.

Note

Only SAS drives from EVS can be used as they are specifically

configured to work with EVS video servers.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 84 85

Sin comentarios

EVS XT2+ Manual de usuario Pagina 45