EVS XT2+ Manual de usuario descargar pdf (Pagina 39)

XT2 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual

Issue

10.05.A

EVS Broadcast Equipment SA – July 2011

The user can choose between 3 modes:

no interpolation: maximizes the vertical bandwidth of the picture but a vertical

jitter appears in “SloMo”. [set 'Interpolation validation' to off, whatever the value

of 'Four lines interpolation']

2-line interpolator: reduces the vertical jitter but the vertical bandwidth is

reduced. [set 'Four lines interpolation' to off and 'Interpolation validation' to on]

4-line interpolator: the picture is perfectly steady but the vertical bandwidth is

even more reduced. [set 'Four lines interpolation' to on and 'Interpolation

validation' to on]

Note:

All VTRs use interpolation in PLAY VAR mode.

1.4.2 CONFIGURATION

This function is used to set the hardware configuration of the system (boards

release numbers, port settings,…).

HOW TO ENTER THE CONFIGURATION WINDOW

To enter the configuration window, press F9 to open the Maintenance menu, select

'Configuration' and press ENTER. A double frame appears around the

Configuration window, and the cursor blinks next to one of the parameters in this

window part.

HOW TO MODIFY AN ITEM IN THE CONFIGURATION WINDOW

1. Press the UP ARROW, DOWN ARROW, or <TAB> keys to select the desired

item.

2. Press the <SPACE BAR> several times until the correct value appears.

3. Select another item to modify or press ESC to go back to the Maintenance

menu.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 84 85

Sin comentarios

EVS XT2+ Manual de usuario Pagina 39