Evs XT3 MulticamLSM Version 11.01 - November 2012 Oper Manual de usuario descargar pdf (Pagina 135)

Multicam - Version 11.01 – Operating Manual

EVS Broadcast Equipment SA – November 2012

Issue

11.01.D

125

11.16.6 Default Mode for Extending a Transition

Introduction

Whenever you make a video or audio split, the transition originally set is changed, which

means extended on either or both sides of the transition boundaries. In the Operational

Setup menu, use the Extend split transition parameter (p.3.2 F3) to set the default

mode for extending transition effects, this means you specify where the effect is

extended.

Transition Modes

The following table summarizes the various transition modes:

Criteria Description

Center (on) Cut The transition is extended equally in both directions. This is

the default value.

End (on) Cut The transition is extended to the left, so that the end of the

transition is not changed.

Start (on) Cut The transition is extended to the right, so that the start of the

transition is not changed.

Ask Asks the operator to choose one of the 3 options above each

time he edits a transition.

Possible Cases

You can build different types of playlists depending on:

• the transition mode in video or audio split

• the transition duration

The following schemas show, for each transition mode, a playlist with:

• the same video and audio transitions (no audio or video split)

on playlists 10, 13 and 16.

• an extended audio transition (V Base edit)

on playlists 11, 14 and 17.

• an extended video transition (A Base edit)

on playlists 12, 15 and 18.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 208 209

Sin comentarios

Evs XT3 MulticamLSM Version 11.01 - November 2012 Oper Manual de usuario Pagina 135