Evs XT3 MulticamLSM Version 11.01 - November 2012 Oper Manual de usuario Pagina 203

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 209
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 202
Multicam - Version 11.01 Operating Manual
EVS Broadcast Equipment SA November 2012
Issue
11.01.D
193
If the Last Cue command refers to a TC that does not exist anymore, the key beeps
but the OSD still displays the number of the cue that you wanted to go to.
Cue points can be marked across several blocks but the recall is limited to the
currently selected block.
Example:
o While recording on memory block 1, mark cue points 1, 2, and 3 on memory
block 1.
o Press TAKE to start recording on block 2 and mark cue points 1, 2, and 3.
o Press TAKE and select memory block 2. The Last Cue command scrolls through
the cue points of block 2.
o To go through cue points of another block, select that block first then press Last
Cue.
On OSD, the first information, displayed in white, refers to the cue points on the
playing block while the second information, displayed in red, refers to the recording
block.
Additionally, the play speed is displayed in % on the OSD.
18.5.5 For-A VFC-7000 Camera
Application Start
At application start, the recording starts on the first memory block.
Configuration Parameter Values
Port = Ethernet
Protocol = UDP
The PGMSpeed parameter value 1000 is not available.
Last Cue values (when Cues is Off): 50, 100, 200, 400, 800, 1600
Key Behavior
PLAY: this key initiates a replay from the first available frame on the current memory
block.
TAKE: this key is operational in ARM mode.
RECORD: the remote beeps if the CAM key refers to an empty block.
RECORD: pressing this key while the current block is recording clears all memory
blocks and starts recording on the first one.
CLEAR: press this key to delete the current memory block data.
Last Cue: If no cue points have been defined, pressing this key will stop the
recording and go back to the first recorded frame of the current memory block.
Vista de pagina 202

Comentarios a estos manuales

Sin comentarios